Overview

Technical record / 0055

The GD90 Trace, the GDMS instrument from MSI, features a proven optical platform with innovative modern stable electronics and control. All voltages are under computer control providing unsurpassed ease of use with a simple USB interface to the control, acquisition and processing PC. Remote control of the instrument and hardware control of acquisition are also incorporated.

Key Features

What Sets This Product Apart

01Tantalum cell and source construction for ease of cleaning
02Availability of cryo-cooling of the GD cell to minimise gas backgrounds
03Accommodates both pin and flat cell geometries
04No mass bias for light/heavy elements
05Calibration consists of a quick check of 180Ta and 181Ta to ensure that the IC and Faraday detectors are in agreement
06Low gas flow allows for cost-effective use of an alternate ionisation gas such as krypton
07Ability to analyse a wide range of samples ranging from alloys to high purity materials (both conductive and non-conductive), in a plethora of sample geometries
08Low sputter rate – at normal analytical conditions the sputter rate ranges from 150 nm/minute (conductive) to 100 nm/minute (non-conductive); lowering operational conditions allows sputter rate to be slowed by at least 5x
09RSFs and Detection Limit determinations are derived from published, readily sourced methods
10Front end assembly allows for the fitting of a custom-designed glove box for nuclear applications
Advantages
  • Full elemental analysis of major (wt%) to ultra-trace elements (ppb to sub-ppb) within a single scan

  • Direct solid sampling technique, thus alleviating the need for chemical digestion

  • Continuously variable high resolution capabilities from <400 to >10,000 RP (10% valley definition)

  • Dual collectors allowing up to 12 orders of linear dynamic range

  • A proven technique for high sensitivity depth-dependent distribution analysis of trace elements in coatings and other multi-layered advanced materials

  • Minimal matrix effects allow calibration without matrix matched standards by using Relative Sensitivity Factors (RSF)

GD90 Trace Applications

Glow discharge mass spectrometry (GDMS) is a mature, versatile technique for the direct determination of elemental content (matrix to sub-trace) in a variety of materials. The GD90 Trace from MSI is capable of many different types of analyses, and can accommodate just about any sample purity, matrix and geometry.

GDMS Analyses

GDMS analyses

Sample Types

All types of materials can be analysed, from alloys to >9N. The samples that we analyse on the GD90 are typically pins 2mm x 2mm x 20mm (or ∼3mm ø x 20mm) or flat blocks ∼15mm x ∼15mm x >1mm, but many other types of sample geometries can be accommodated by mounting them on a secondary binder. Some examples of irregular type samples which can be analysed are:

granular powders

wafers

screws

filings

fine powders

shot pellets

wires

turnings

thin foils (<1µm) 

waste products

chips

shards

Oxides and other non-conductive materials can be analysed in direct current mode (DC) by mounting them on a secondary conductive binder, typically indium. Generally, this is a simple, quick procedure which can be done manually. Additionally due to cryo-cooling of the GD cell, low melting point materials such as tin (Sn), antimony (Sb), indium (In) and gallium (Ga) can be analysed.

Inquiry channel open

Interested in This Product?

Contact our team for detailed specifications, pricing, and customization options.

Request Information
All Products
GD90 Trace | Products | Opticore